Cart is empty
Livesale Offline More

RAID - How does it work?

07/20/2015 | Internet hosting |

What is RAID, why do you need it and why are the different RAID levels so important? RAID stands for redundant array of independent disks. It is a technique that was developed to provide speed, reliability and increased storage capacity using multiple disks rather than single disk solutions.


So basically, RAID takes multiple hard drives and allows them to be used as one large hard drive with benefits depending on level of RAID being used. As mentioned, RAID has several levels and each RAID level has its own characteristics. The one you should choose totally depends on wether you are using RAID for performance, fault tolerance or both.


Here is a short explanation of the popular RAID levels.


RAID 0: Speed

RAID 0 can be used to boost the performance of your dedicated server. It consists of striping without mirroring and parity. All data is written accross multiple disks which means that the work of the server is handled by multiple disks instead of one.

This will increase the performance of your dedicated server due to the fact that multiple drives are reading and writing data. The disadvanatage is that there is no fault tolerance which means that the entire array will be affected if one disk fails and this can lead to data loss or corruption.


RAID 1: Safety First

With RAID 1 your data will be copied from one disk to another, creating a replica or mirror. Let’s say that you have a 10 GB file and you have a RAID 1 configuration, your file will be saved on the first and second drive. Your data will be available even when one disk gets fried, that’s why we can call this a safe or fault tolerance configuration. RAID 1 can be implemented through software and hardware. 



RAID 10: Fast performance and Safety

RAID 10 is a combination of both levels. (RAID 1 and 0) With this configuration you can get fast performance and redundancy. It is perfect for heavy database machines or for machines that are performing many write operations. In order to configure your dedicated server in Raid 10 you need to have a machine with 4 disks. You can implement RAID 10 in both hardware and software but usually when you use software RAID 10 many of the performance advantages will be lost.



RAID 5: Looking for something between?

RAID 5 is a little bit complicated to explain but it is a solution between RAID 0 and RAID 1. RAID 5 can be implemented with 3 to 16 disks. However, for optimal redundancy we do recommend a 3+1 configuration. With this configuration one disk is used for storing parity data for every 3 disks that are used in the RAID configuration. This configuration is just as safe as RAID 1. Unlike RAID 1 you will only use the capacity of one drive so for example if you have 3 disks you will only use 33% of the disk space and if you have 4 disks you will use 25% and so on. 




RAID 6: Similar to RAID level 5

RAID 6 is similar to RAID level 5 but it allows extra fault tolerance. The parity data are written to two disks which means that it requires at least 4 disks. If two drives fail you will still have acces to all of your data even when the failed drives are being replaced so we can call it more secure than a RAID 5 configuration.


How many disk space can I use after the RAID configuration?

This depends on the preferred RAID level. For example, RAID 1 uses the capacity of one of its drives to maintain fault tolerance. So if you combine 2x 500 GB drives in RAID 1, you will get 500 GB of usable disk space.


With RAID 10 half the array capacity is used to maintain fault tolerance. If you combine 4x 500 GB drives in RAID 10, you will get 1000 Gb of usable disk space.




New Dell servers with iDRAC 8 Enterprise are available now

07/15/2015 | Internet hosting |

We now offer Dell PowerEdge 13th generation servers with iDrac 8 Enterprise. This line comes with several design and firmware improvements that will boost the performance of your dedicated server. ...


Scheduled network maintenance on 15 July 2015

07/10/2015 | News |

We will perform maintenance on our core switches on 15 July 2015. The maintenance window starts at 01:00 CEST and ends 01:30 CEST. During this maintenance window we will perform the following action ...


Which CMS you should choose

07/10/2015 | Internet hosting |

When you’ve decided to create a website or to start a blog the first question that you are going to ask yourself is, which content management system you need to use.   The most popular a ...


Three ways to troubleshoot before you reboot your dedicated server

07/03/2015 | Internet hosting |

As an administrator you quite often find yourself in a situation where your screen suddenly freezes or that your system gets slow. In these situations you usually tend to reboot your server ...


Debian 8 is now available on our website and SnelPanel

06/25/2015 | Internet hosting |

Debian 8 nicknamed “Jessie” was released a few months ago and is now available on our website and also as an instant install option at our SnelPanel.   Before you decide t ...


5 Tips to make Joomla faster

05/20/2015 | Internet hosting |

Are you running joomla and do you feel that your site is slow? Then we have a few handy tips for you that can be helpful to solve the slowness of your site. Check the speed The first step is to chec ...


See what's inside CentOS 7.1

04/21/2015 | Internet hosting |

We now offer CentOS 7.1 as an instant install option through your SnelPanel. This is the second major release for CentOS 7 and is tagged as 1503. This build is derived from Red Hat Enterprise Linux 7. ...


VMware 6.0 is available now

04/20/2015 | Internet hosting |

So VMware 6.0 is finally available between our Operating system offers. You are able to install VMware 6.0 with instant setup through your SnelPanel. This edition of VMware comes with new feature ...


Make Your Money Worth More - Add Your Funds Now

04/13/2015 | News |

SnelFunds is one of the most convenient ways to pay your invoices but that's not all! Adding SnelFunds makes  your money worth even more. We have doubled the bonus rates ...


<< Older posts

Here are 4 out of 12 reasons why you should choose

99,9% uptime

High availability of servers are extremely important to our customers, thus we take uptime seriously. We offer 99,9% uptime on all our dedicated servers and third party monitoring to prove it. Moreover, we have a completely redundant network and we can execute network maintenance without any packet loss on your end.

Native IPv6

IPv4 addresses are running out very quickly and preparing for native IPv6 is essential. We offer native IPv6 with all our servers by default, complete with reverse DNS. This means that our entire infrastructure is IPv6 supported. Dedicated servers with native IPv6 are truly future proof. We enable you to use your native IPv6 addresses instantly after your server activation.

Application Programming Interface (API) provides a reliable and easy to implement Application Programming interface (API). Our API allows you to integrate our control panel seamlessly into your own systems. By integrating our control panel you can resell our dedicated servers under your own private brand at prices you want. We allow you to use our infrastructure and at the same time you will have a total control in providing support to your own customers. Get started on integrating our powerful API in to your business and earn money easily.

Enterprise servers

Here at we are not using desktop machines but only the best servers from Supermicro and Dell which are designed to give you the best performance and to provide energy and space efficiency. Supermicro provides innovative and first-to market technologies and their motherboards are quality-built to maximize customer satisfaction. And Dell servers are built to accelerate performance and expandability but also to increase productivity. Our Dell servers perfectly meet to the most common requests and requirements of our customers.